My differential case has tooth missing. Should I just replace it with another the same or should I upgrade? If I upgrade which do I choose to fit my original axles? I found out cause we are installing 4:10 gears
Sent from my LG-H918 using Tapatalk
My differential case has tooth missing. Should I just replace it with another the same or should I upgrade? If I upgrade which do I choose to fit my original axles? I found out cause we are installing 4:10 gears
Sent from my LG-H918 using Tapatalk
03 or 04 Marauder, crown Vic or grand Marquis has same rear axle housing. Gear ratio most likely different. Mid year 05 and later are 31 spline axles. Yours are 28 spline
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
If it was me, I'd try to find a used side or spider gear and replace the broken one.
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
Would gear ratio make a difference?
Sent from my LG-H918 using Tapatalk
Get a Detroit trutrac and forgetaboutit.
Built: 3/16/2004Number 9,879 of 11,052 for Total ProductionNumber 2,040 of 3,213 for 2004 Model YearNumber 663 of 980 Dark Toreador Red ProducedDark Charcoal Interior - CD Changer - Heated Seats - Trunk Oganizer - Moonroof - Rear Deck SpoilerTrilogy S/C kit #224 installed August 2010Detroit Tru-Trac 31 spline with 4.10 gearsetMust - Go - Faster !
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
He has my old tuner that is setup for 3.55 or 4.10 tuning.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
Was going to install 4.10 gears. Spider Gears all chewed up. Are there any replacement if yes part #? If no what internals can I install to replace? I saw some trans lock but which can I install with no modification and continue using my splines and rear end cover. Or any ford 8.8 28 spline fits?
Sent from my LG-H918 using Tapatalk
#2941 300A
4.10's, carbon clutches
Marty O Tune
Curless Cure
Widened Wheels
Dead Pedal
Eaton Swapped
Bar tender and maker of:
Christmas in a cup
The "Bucket of South Haven Iced Tea"
One Legged Lesbian Kickboxer
Cocka Two
#2941 300A
4.10's, carbon clutches
Marty O Tune
Curless Cure
Widened Wheels
Dead Pedal
Eaton Swapped
Bar tender and maker of:
Christmas in a cup
The "Bucket of South Haven Iced Tea"
One Legged Lesbian Kickboxer
Cocka Two
Use car-part.com to search for an axle with 3.55 gears or part it out
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Is this them?
https://parts.autonationfordwhitebea...Y4LWdhcw%3D%3D
There are currently 1 users browsing this thread. (0 members and 1 guests)