Page 1 of 2 12 LastLast
Results 1 to 15 of 23

Thread: Found this setup can I make it work?

  1. #1
    Join Date
    Sep 2015
    Location
    warwick ri 02889
    Age
    50
    Posts
    165

    Found this setup can I make it work?

    Hi guys I know there are plenty of supercharging threads and lists on here, and I've looked on a few of them already, but if anyone could tell me yes or no as far as this being worth my time and Being adaptable to my vehicle I would greatly appreciate any input and knowledge that you guys could offer as far as what else would I need besides I'm pretty sure a lower intake.. thank you very much in advance guys!https://www.facebook.com/marketplace...3661565727881/

    Sent from my Moto Z (2) using Tapatalk

  2. #2
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    52
    Posts
    3,836
    No, its for a 2V engine

  3. #3
    Join Date
    Sep 2015
    Location
    warwick ri 02889
    Age
    50
    Posts
    165
    Quote Originally Posted by musclemerc View Post
    No, its for a 2V engine
    Yes I'm aware. Maybe I should rephrase my question.. All the parts are new. Could I use this charger and some of the parts with a lower intake for a 4v and do some parts scrounging to make this work? Or is the supercharger not compatible at all with a 4v Due to case design/length ? I believe I can buy it for $2500. Basically trying to figure if it's worth the trouble of going That route and it's Enough of a deal to do so and chase the rest of what I need to complete the installation. Or if it would be a really expensive paperweight. Not trying to ask a million stupid questions but I won't pop on it if it will be useless. But don't want to pass it up if I could Cobble something together without going crazy.

    Sent from my Moto Z (2) using Tapatalk

  4. #4
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    No
    No
    No
    No
    NO

  5. #5
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    52
    Posts
    3,836
    If you can fabricate, yes you can use the SC.
    You'd have to make an adapter plate
    Add an intercooler and a lower intake
    You may be able to use the idler plate but be prepared to address belt routing because it's a single belt drive setup

    KB sold a 2.1L 4v kit back in the day for Mach1/2k Cobra it too was a single belt drive.
    Last edited by musclemerc; 10-03-2018 at 06:03 AM.

  6. #6
    Join Date
    Feb 2011
    Location
    New Jersey
    Age
    40
    Posts
    1,189
    and im guessing this would bolt up nicely to a 05 crown vic

  7. #7
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    52
    Posts
    3,836
    Yes... it would no problem.
    Just an fyi I dont think its intercooled.
    Edit: it is intercooled
    Last edited by musclemerc; 10-03-2018 at 06:43 PM.

  8. #8
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    A 2.2 could be risky on a stock internal motor unless you keep it lower boost and hp..might need to change pulley.
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  9. #9
    Join Date
    Sep 2015
    Location
    warwick ri 02889
    Age
    50
    Posts
    165
    Thanks for the replies guys. Much appreciated. I can fabricate to a degree but unless I can score it for next to nothing then the juice probably isn't worth the squeeze.

    Sent from my Moto Z (2) using Tapatalk

  10. #10
    Join Date
    Jan 2017
    Location
    Springfield Mo
    Age
    44
    Posts
    198

  11. #11
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    52
    Posts
    3,836
    Can't get more complete than that!

  12. #12
    Join Date
    Sep 2015
    Location
    warwick ri 02889
    Age
    50
    Posts
    165
    Haven't been on in a bit.. Missed it! Thanks for posting it though

    Sent from my Moto Z (2) using Tapatalk

  13. #13
    Join Date
    Jul 2007
    Location
    Wisconsin
    Age
    73
    Posts
    243


    So, I see this guy has another set up for sale. Same as the one in the link above. How hard is it to install one of these on an 03 stock Marauder?


    Thank you,
    Joe

  14. #14
    Join Date
    Jan 2017
    Location
    Springfield Mo
    Age
    44
    Posts
    198
    Quote Originally Posted by joedee View Post
    So, I see this guy has another set up for sale. Same as the one in the link above. How hard is it to install one of these on an 03 stock Marauder?


    Thank you,
    Joe
    It's really pretty easy for someone handy with normal tools. It looks pretty complete of the large items. I don't see an Intercooler pump, fuel pumps or injectors. You will need a tuner and a tensioner too. All in all its a pretty good deal if you don't want to search for the parts separately. Especially since it comes with those swap brackets.

  15. #15
    Join Date
    Jan 2017
    Location
    Springfield Mo
    Age
    44
    Posts
    198
    I also don't see the coolant tube that runs under the manifold but I'm told you can smash the oem one. You will also need a fuel rail(which I have and will ship you free if you do this).

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. guess what I found at work
    By ntd in forum The Lounge
    Replies: 22
    Last Post: 06-29-2010, 03:34 AM
  2. So i have the magazine but how do I make it work?
    By Aren Jay in forum The Lounge
    Replies: 1
    Last Post: 06-17-2009, 08:25 AM
  3. People at work saw you guys on their way to work
    By tbug in forum Motor City Marauders
    Replies: 6
    Last Post: 09-10-2005, 07:58 AM
  4. dose anbody make a nitrous setup for the marauder
    By iboss429 in forum Shop Talk
    Replies: 3
    Last Post: 03-10-2005, 01:20 PM
  5. Make it go or make it shine
    By Accufab Racing in forum Events
    Replies: 0
    Last Post: 02-24-2003, 03:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •