Page 2 of 7 FirstFirst 1234567 LastLast
Results 16 to 30 of 99

Thread: Blast from the past - who knows what this is?

  1. #16
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,665
    Butt plug for a Camaro owner....

    or a bellhousing 'centering'/starter bolt.

    (IIRC SBF bellhousing bolts are 7/16")
    Last edited by Joe Walsh; 10-21-2018 at 05:55 PM.
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  2. #17
    Join Date
    Jul 2010
    Location
    Guntersville Al.
    Age
    59
    Posts
    1,291
    Quote Originally Posted by MyBlackBeasts View Post
    3/8” coarse bolt ground to a taper... GO!




    Sent from my iPhone using Tapatalk

    I do this to 1" bolts to use like a bull pin. The 2 pieces of metal I have to line up are to thick and a regular bull pin doesn't work that well.

    It was an honor to have
    my ASS kicked by you!
    Rest In Peace!
    Paul T. Casey

  3. #18
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    What is a poor man tap for $200 Alex. Er Bill


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  4. #19
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by justbob View Post
    What is a poor man tap for $200 Alex. Er Bill


    Sent from my iPhone using Tapatalk Pro

    Nope. Try again.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  5. #20
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Ok, so no one got this one, here is answer:


    It’s used to retain a small block Chevy (carberated) fuel pump drive rod so it doesn’t drop down and impede installation when replacing fuel pump


    Quote Originally Posted by MyBlackBeasts View Post
    3/8” coarse bolt ground to a taper... GO!




    Sent from my iPhone using Tapatalk

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  6. #21
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Try this one:



    Sent from my iPhone using Tapatalk

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  7. #22
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,665
    Spanner wrench for a boat's fuel cap.
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  8. #23
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by Joe Walsh View Post
    Spanner wrench for a boat's fuel cap.
    Nope. Sorry, try again.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  9. #24
    Join Date
    Jul 2010
    Location
    Guntersville Al.
    Age
    59
    Posts
    1,291
    It's the heavy dutiest 55 gl. Drum cap removal tool I've ever seen.

    It was an honor to have
    my ASS kicked by you!
    Rest In Peace!
    Paul T. Casey

  10. #25
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by Granddaddy Marq View Post
    It's the heavy dutiest 55 gl. Drum cap removal tool I've ever seen.

    Hahahaha!!! Nope, try again!

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  11. #26
    Join Date
    Jan 2018
    Location
    Califon NJ
    Age
    37
    Posts
    259
    You mean you don't let the fuel pump drive rod fall down, fumble about, cuss a bit, smear it with grease and then stuff it back in there?
    Looks like a tool for a brake caliper piston. You know, those annoying ones that have to be turned back in.

  12. #27
    Join Date
    Jun 2008
    Location
    Waukesha, WI
    Posts
    1,604
    Spreader tool for struts?
    You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference

    I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard

    2004 300A Procharger #0010 D1X
    2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)

  13. #28
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by Grimrepairman View Post
    You mean you don't let the fuel pump drive rod fall down, fumble about, cuss a bit, smear it with grease and then stuff it back in there?

    Nope. I let others do that for a bit and then show them the secret passage to thread the home made bolt in to that junctions the rod bore so the bolt pinches the rod (use ZERO force!) in place while pump is swapped out easy peezy. Should not take longer than 10 minutes to replace SBC fuel pump.


    Quote Originally Posted by Grimrepairman View Post
    Looks like a tool for a brake caliper piston. You know, those annoying ones that have to be turned back in.

    CORRECT! This one is Ford. Got it for my Mark V. slightly annoying but the superior design for rear disc parking brake especially over the little brake shoe design on the MM
    Last edited by MyBlackBeasts; 10-23-2018 at 04:58 PM.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  14. #29
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Here’s the next one.



    Sent from my iPhone using Tapatalk

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  15. #30
    Join Date
    Jul 2010
    Location
    Guntersville Al.
    Age
    59
    Posts
    1,291
    That is a Moon shine jug corncob cork remover. Use when Billy Joe Bob gets a little to drunk and knocks the corncob too far down in the jug and he can't get his 2 remaining teeth on it to pull it out. Very rare tool, but still widely use in 4 rural Alabama counties.

    It was an honor to have
    my ASS kicked by you!
    Rest In Peace!
    Paul T. Casey

Page 2 of 7 FirstFirst 1234567 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Blast from the past
    By blackhueys in forum The Lounge
    Replies: 8
    Last Post: 07-15-2018, 11:26 AM
  2. Blast from the Past
    By Pat in forum Community Discussion
    Replies: 4
    Last Post: 12-13-2015, 07:48 AM
  3. Blast from the past
    By mcb26 in forum The Lounge
    Replies: 2
    Last Post: 11-02-2012, 04:45 PM
  4. Blast from the past
    By CWright in forum The Lounge
    Replies: 28
    Last Post: 09-23-2009, 08:11 PM
  5. Blast from the past?
    By Aren Jay in forum Community Discussion
    Replies: 17
    Last Post: 01-12-2009, 08:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •