Page 2 of 2 FirstFirst 12
Results 16 to 26 of 26

Thread: Drag Racing best shift method

  1. #16
    Join Date
    Aug 2015
    Location
    Bentley, KS
    Age
    46
    Posts
    117
    Quote Originally Posted by Fly007 View Post
    Well my best was a 14.86 followed by about 3 15.02's and a 15.18 just seems like it should be quicker with the mods I have (4.10, JLT, MSD street fire coils and Lidio Tune). Wondering if I should try a Marty'O tune? My best ever with that combo was 14.68. Tried both 91 and 93 octane tunes and didn't make a difference.


    Sent from my iPhone using Tapatalk


    Oh and I could only load converter to 2500 anything over that tires would spin stationary, track prep wasn't very good last night.


    Sent from my iPhone using Tapatalk

  2. #17
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    Please post all the data for each run, the temp and humidity.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  3. #18
    Join Date
    Aug 2015
    Location
    Bentley, KS
    Age
    46
    Posts
    117
    Quote Originally Posted by sailsmen View Post
    Please post all the data for each run, the temp and humidity.


    Best run was:
    .06753 Reaction
    2.2561 60 foot
    6.3748 330 foot
    9.6611 1/8 mile
    74.81 1/8 mph
    12.4638 1000 foot
    87.50 1000 mph
    14.8546 1/4
    94.22 1/4 mph

    Next best was
    .0504 Reaction
    2.2781 60 foot
    6.4457 330 foot
    9.7726 1/8
    74.32 1/8 mph
    12.6081 1000 ft
    85.93 1000 mph
    15.0174 1/4
    93.54 1/4 mph

    At time of best run temp 71.1 degrees, 73% humidity, 30.06 pressure.

    Next best run 69.1 degrees, 78% humidity, 30.06 pressure.



    Sent from my iPhone using Tapatalk

  4. #19
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    Chip, UD Pulleys, 4:10, Denso, Thermostat

    60 330 Eight MPH 1,000 Quarter MPH Temp Hum


    3.033 8.023 11.506 72.47 14.385 16.808 93.16 80* 80%
    2.172 6.175 9.411 76.72 12.191 14.554 95.46
    2.185 6.2 9.464 76.07 12.253 14.627 94.97
    2.242 6.271 9.524 75.97 12.331 14.73 93.91


    2.183 6.102 9.27 78.26 12.007 14.331 97.08 60* 40%
    2.168 6.062 9.214 78.53 11.95 14.274 97.05
    2.166 6.062 9.218 78.44 11.956 14.286 96.79
    2.194 6.098 9.261 78.34 11.987 14.305 97.3

    Looks like you are spinning and would have a faster time by reducing your launch RPMs.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  5. #20
    Join Date
    Aug 2015
    Location
    Bentley, KS
    Age
    46
    Posts
    117
    Your saying on your 14.73 ET you had a 2.242 60 foot, on my 14.85 ET I had 2.2561 60 Foot, I would say that is pretty comparable especially when you look at the MPH 93.91 vs 94.22. Either way no tire spin, she had good grip off the line.


    Quote Originally Posted by sailsmen View Post
    Chip, UD Pulleys, 4:10, Denso, Thermostat

    60 330 Eight MPH 1,000 Quarter MPH Temp Hum


    3.033 8.023 11.506 72.47 14.385 16.808 93.16 80* 80%
    2.172 6.175 9.411 76.72 12.191 14.554 95.46
    2.185 6.2 9.464 76.07 12.253 14.627 94.97
    2.242 6.271 9.524 75.97 12.331 14.73 93.91


    2.183 6.102 9.27 78.26 12.007 14.331 97.08 60* 40%
    2.168 6.062 9.214 78.53 11.95 14.274 97.05
    2.166 6.062 9.218 78.44 11.956 14.286 96.79
    2.194 6.098 9.261 78.34 11.987 14.305 97.3

    Looks like you are spinning and would have a faster time by reducing your launch RPMs.

  6. #21
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    No what I am saying is a 2.172 60' equals a 14.554. To get a lower ET lower your 60'.

    "Oh and I could only load converter to 2500 anything over that tires would spin stationary, track prep wasn't very good last night."???
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  7. #22
    Join Date
    Aug 2015
    Location
    Bentley, KS
    Age
    46
    Posts
    117
    Quote Originally Posted by sailsmen View Post
    No what I am saying is a 2.172 60' equals a 14.554. To get a lower ET lower your 60'.

    "Oh and I could only load converter to 2500 anything over that tires would spin stationary, track prep wasn't very good last night."???


    Exactly, 2500 was my max stationary, tires would start to chirp after that, 2500 and let off brake no tires spin off line.


    Sent from my iPhone using Tapatalk

  8. #23
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,666
    Quote Originally Posted by Fly007 View Post
    Well my best was a 14.86 followed by about 3 15.02's and a 15.18 just seems like it should be quicker with the mods I have (4.10, JLT, MSD street fire coils and Lidio Tune). Wondering if I should try a Marty'O tune? My best ever with that combo was 14.68. Tried both 91 and 93 octane tunes and didn't make a difference.
    What was the temperature and humidity at the track when you ran?
    the difference between a cool, dry 50 degree night and an humid 80 degree night is surprising.

    BTW: Just read an article about a test of the new Demon in hot temperatures and 1,000 more feet of elevation....
    The advertised '9.80' E/T ballooned to an 11 flat.
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  9. #24
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    C #18.........
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  10. #25
    Join Date
    Sep 2006
    Location
    Psych ward
    Age
    53
    Posts
    1,081
    when in manual mode the trans line pressure is max, thus the hard shifts, if the trans had the J mod and shift kit ,with the right tune the tires would bark ...lol

    unless the trans is fully built and designed to be a manual shift the electronics are faster, most times when they dont shift right it because the tuner has set up the RPM points which in fact it should be set to MPH which is more accurate.

    put on some nice drag radials and get your 60s down and the car will ET better.
    Drag racing is all about acceleration.




    Quote Originally Posted by Fly007 View Post
    For some reason the car feels like it shifts harder if I do it manually. When I shift manually it barks the tires on the 1-2 shift, if I leave it in drive it doesn't. Not sure what the difference is. Car has 4.10, Lidio Tune, JLT Cold Air.


    Sent from my iPhone using Tapatalk
    • 82 GT coyote swap started
    • 03 300a Marauder, stroked,cammed,T/S Trilogy Supercharged # 216,Best Et 10.77@129.72 on slicks, 93 pump gas. driven to the track.
    • 2011 GT 500, 3.4 whipple,93 pump gas,10.47@133,Driven to the track.
    • 2003 azura blue Mach 1, cobra motor,2.9 Whipple,crusher inlet,built 4r70w trans,04 IRS rear.full weight street car, Corn Fed

  11. #26
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    On street tires;
    1.966 5.686 8.768 80.03 11.452 13.743 98.33
    1.979 5.72 8.818 79.66 11.52 13.826 97.48

    65*/60%

    1.961 5.71 8.806 79.64 11.508 13.808 97.91


    1.98 5.722 8.807 80.02 11.495 13.786 98.37
    2.016 5.783 8.893 79.46 11.598 13.903 97.59

    55*/65%
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Drag racing?
    By cougar9150 in forum Sunshine State Marauders
    Replies: 1
    Last Post: 08-10-2009, 06:08 PM
  2. Drag racing at MV-IV
    By Bigdogjim in forum Community Discussion
    Replies: 30
    Last Post: 01-29-2006, 10:09 PM
  3. Any one up for a little drag racing?
    By QWK SVT in forum Maple Leaf Marauders
    Replies: 1
    Last Post: 09-30-2004, 06:42 PM
  4. Best drag method
    By BigMerc in forum The Lounge
    Replies: 6
    Last Post: 10-24-2003, 09:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •