Page 1 of 3 123 LastLast
Results 1 to 15 of 34

Thread: Widened wheels with drag radials

  1. #1
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026

    Widened wheels with drag radials

    I have a pair of widened Marauder wheels, the wheels have been PVD coated and have Mickey Thompson P305/45R18 drag radials(ET Street R) on them.

    This was one of my spare sets, tires are new and the wheels were never mounted on the car after PVD and the tires installed.

    $1250 and shipping via FedEx ground, is sales only or shipped to a US address for you to pick them up.





    Sent from my iThrone using Tapatalk
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  2. #2
    Join Date
    Dec 2013
    Location
    Texas
    Posts
    499
    How much just for the wheels?

  3. #3
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by LG88 View Post
    How much just for the wheels?


    $1250


    ........


    Sent from my iThrone using Tapatalk
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  4. #4
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    What year were the tires purchased?

    Do you know what year the tires were mfg?
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  5. #5
    Join Date
    Oct 2014
    Location
    Cunningham, Kansas
    Age
    70
    Posts
    695
    Looks like tires manufactured 7th week of 2016 from the picture above. (0716)
    2004 SB #2150 of 3214 Moonroof, Heated Seats and 6 CD Changer. Non OEM Mufflers and 32,XXX miles and counting.

  6. #6
    Join Date
    Jan 2006
    Location
    Northern California
    Posts
    2,373
    These are widened stock wheels in great shape. The buyer of the wheels should count themselves fortunate, tires aside.

  7. #7
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    They are a good buy.

    In my case I am in the market for very specific tires.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  8. #8
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by Fastbob View Post
    Looks like tires manufactured 7th week of 2016 from the picture above. (0716)


    ^^^THIS^^^ is correct.


    Sent from my iThrone using Tapatalk
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  9. #9
    Join Date
    Jun 2002
    Location
    Pleasant Hill Ca. - across the bay from San Francisco.
    Posts
    280
    Spectragod. Yes I'll take them. Warren (MTYBLKSTEED) Call me 925-200-1975. Thanks

  10. #10
    Join Date
    Mar 2013
    Location
    Southwest Florida
    Age
    60
    Posts
    1,524
    would these work with on my 2004 with 255 45's in the front?

    "RescuRauder", Born on 09/02/2003 & rescued on 04/05/2013. #236 of 3214 and #62 of 1237 in Black. CAI, Some kind of tune, Kooks Headers, X-pipe w/Hi-Flow cats, Magnaflow mufflers, Resonators removed, 4.10's, Metco U&L CA and Watts link, Drilled & slotted rotors, now BOOSTED!! Eaton Swapped 12/29/19!!
    Sold! 1986 Mustang GT Vert, Black, 5spd, new short block, Powerheads, Crower 15511, gears, exhaust etc.

    1968 Ford (Galaxie) XL fastback, 390, factory buckets & auto on floor
    2011 Shelby GT500, Kona Blue with SVT Performance Pkg & Navigation, VMP tuned ~550rwhp/550rwtq. Finally Blown!

  11. #11
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by sflrainmaker01 View Post
    would these work with on my 2004 with 255 45's in the front?


    I imagine that they would.
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  12. #12
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Contrary to what post 9 says, these are still available. For future reference,
    If you say "you'll take them", that means sold, not I want to ask questions....just FYI.
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  13. #13
    Join Date
    Feb 2012
    Location
    harrison twp,mi
    Posts
    8,700
    soooooo

    what's the new price?
    Those were the days.........

    DANG THEY'RE CUTE!!!!!!
    Smile and Nod
    I love THIS bar

  14. #14
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by lji372 View Post
    soooooo

    what's the new price?


    $8

    ..........



    Sent from my iThrone using Tapatalk
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  15. #15
    Join Date
    Feb 2012
    Location
    harrison twp,mi
    Posts
    8,700
    Quote Originally Posted by Spectragod View Post
    $8

    ..........



    Sent from my iThrone using Tapatalk
    SOLD!!!!
    Those were the days.........

    DANG THEY'RE CUTE!!!!!!
    Smile and Nod
    I love THIS bar

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wanted To Buy WTB Drag Radials and wheels
    By oklxs03 in forum Marauder Parts/Misc. Wanted
    Replies: 5
    Last Post: 04-16-2015, 06:06 PM
  2. For Sale Custom Drag Wheels with BF Goodrich T/A Drag Radials
    By jspradii in forum Marauder-specific Parts for Sale
    Replies: 8
    Last Post: 10-19-2012, 10:18 AM
  3. Widened OEM wheels with Nitto 305/45R18 drag radials
    By liquid in forum Marauder-specific Parts for Sale
    Replies: 14
    Last Post: 09-24-2008, 10:40 PM
  4. new 305 drag radials for widened wheels
    By thePunisher in forum Tires & Wheels
    Replies: 60
    Last Post: 02-28-2008, 06:43 AM
  5. Selling my drag radials and wheels
    By SergntMac in forum Tires & Wheels
    Replies: 3
    Last Post: 07-15-2005, 02:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •