Chris Stewart
Finally got the new tires (Nitto NTO5R) on the car, and took it to an 1/8 mile drag strip today. Liked the tires a lot! Much better than Toyo Proxes ll's. Drivers side moved about 3 inches within the 5 passes, nothing from the other side. Ran them at 25psi.
Chris Stewart
03 Marauder
Paxton 2200
20" wheels
637.21rwhp
538.59rwtq
04 DTR Son's car
4.10, K&N CAI, Jeff tune
Headers, underdrive pulley
297.26 rwhp
312rwtq
06 F-150 Supercrew Lariat 4x4
305/55 20's
Post Marauder Mod Disorder
Nice time, sir. Congrats.
Chris Stewart
Thank you!
Was able to run a modded CTS V, and out ran him by about 3 tenths. Enjoyed that!
Chris Stewart
03 Marauder
Paxton 2200
20" wheels
637.21rwhp
538.59rwtq
04 DTR Son's car
4.10, K&N CAI, Jeff tune
Headers, underdrive pulley
297.26 rwhp
312rwtq
06 F-150 Supercrew Lariat 4x4
305/55 20's
the grundle always gets ya
Very nice!
300A Black
4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.
Sick-Speed play toy
Nice runs!
Sent from my iPhone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Supporting Member
Please advise Temp, Humidity and Tire Size.
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
Chris Stewart
Was low 80's, not sure of the humidity, but pretty cloudy.Originally Posted by sailsmen
315/35R20 tires.
Chris Stewart
03 Marauder
Paxton 2200
20" wheels
637.21rwhp
538.59rwtq
04 DTR Son's car
4.10, K&N CAI, Jeff tune
Headers, underdrive pulley
297.26 rwhp
312rwtq
06 F-150 Supercrew Lariat 4x4
305/55 20's
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote