Page 8 of 8 FirstFirst 12345678
Results 106 to 118 of 118

Thread: THE MARAUDER CENTRIFUGAL PULLEY /BOOST COMBO THREAD

  1. #106
    Join Date
    Apr 2013
    Location
    Stanberry, Missouri
    Age
    51
    Posts
    311
    429 HP and 370 something TQ per Marty's Dyno

    5.0 stroker kit in stock block stock heads and cam on a conservative tune.

    4.10 gears stock trans taller tires on stock width rims.

    Oh yeah --- Vortech V3 with 8 lbs or so and an inter-cooler.

  2. #107
    Join Date
    May 2011
    Location
    Schenectady, NY
    Posts
    1,246
    Got 425 hp and 380 tq at 6000rpm on 7.7lbs of boost with new 3.3 pulley on the novi 1200 and SW headers.
    300A Black
    4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.

  3. #108
    Join Date
    Sep 2013
    Location
    ST Louis
    Age
    38
    Posts
    1,466
    Quote Originally Posted by camelgrundle View Post
    Got 425 hp and 380 tq at 6000rpm on 7.7lbs of boost with new 3.3 pulley on the novi 1200 and SW headers.
    lucky you

    Build# 1979/3214
    Year 2004
    300B
    Ext. DTR
    Int. Dark Char
    FINALLY BOOSTED!!!

  4. #109
    Join Date
    May 2011
    Location
    Schenectady, NY
    Posts
    1,246
    You are almost there man!
    300A Black
    4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.

  5. #110
    Join Date
    Sep 2013
    Location
    ST Louis
    Age
    38
    Posts
    1,466
    Quote Originally Posted by camelgrundle View Post
    You are almost there man!
    Just had a huge set back. My timing guides and tensioners went bad within less than a year after the install.

    Build# 1979/3214
    Year 2004
    300B
    Ext. DTR
    Int. Dark Char
    FINALLY BOOSTED!!!

  6. #111
    Join Date
    May 2011
    Location
    Schenectady, NY
    Posts
    1,246
    Quote Originally Posted by cer0413 View Post
    Just had a huge set back. My timing guides and tensioners went bad within less than a year after the install.
    Wow that sucks man. Bad parts or what?
    300A Black
    4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.

  7. #112
    Join Date
    Oct 2010
    Location
    4 miles from insanity and 2ft from broke!
    Posts
    9,559
    Quote Originally Posted by cer0413 View Post
    Just had a huge set back. My timing guides and tensioners went bad within less than a year after the install.
    You either got faulty parts , or a poor installation.
    04 MERCURY MARAUDER build date:02/11/04
    ITS ALIVE !!!!!!!!

    STAY TUNED!!!!!!!!!!

    **WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP

    VISIT MY GARAGE FOR A FULL LIST OF MODS

  8. #113
    Join Date
    Sep 2013
    Location
    ST Louis
    Age
    38
    Posts
    1,466
    Quote Originally Posted by MOTOWN View Post
    You either got faulty parts , or a poor installation.
    no way to prove either side but one party is willing to help. the parts have a lifetime warranty so when those come in, life starts all over for me. My boost goal lives on.

    Build# 1979/3214
    Year 2004
    300B
    Ext. DTR
    Int. Dark Char
    FINALLY BOOSTED!!!

  9. #114
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    I would go to a different shop.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  10. #115
    Join Date
    Sep 2013
    Location
    ST Louis
    Age
    38
    Posts
    1,466
    1. RWHP and Torque? 400.32 rwhp 409.39 rwtq

    2. Engine and Compression? Aluminator 10:1

    3. Amount of boost? 9.97psi @ 5500rpm

    4. Type of Blower? P1sc procharger

    5. Pulley Combo? (8 rib) 3.55 supercharger, 18% OD IW

    6. Tensioner type? (Thump 3-bolt)

    7. Ported Heads? No

    8. Cams? No

    9. What intake? Stock

    10. Intercooler Treadstone 1035

    11. Exhaust Combo? Stock manifolds, no rear cats, flowmaster 50s stock tips

    12. Fuel / Degrees of timing? (93 Octane) Focus gt pump w/modded FPDM (racerx), 60lbs inj.

    Build# 1979/3214
    Year 2004
    300B
    Ext. DTR
    Int. Dark Char
    FINALLY BOOSTED!!!

  11. #116
    Join Date
    May 2011
    Location
    Schenectady, NY
    Posts
    1,246
    Nice man! ....
    300A Black
    4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.

  12. #117
    Join Date
    Sep 2013
    Location
    ST Louis
    Age
    38
    Posts
    1,466
    Quote Originally Posted by camelgrundle View Post
    Nice man! ....
    Thanks. Too bad I won't see it's real potential until it's with another tuner.

    Sent from my SM-G950U using Tapatalk

    Build# 1979/3214
    Year 2004
    300B
    Ext. DTR
    Int. Dark Char
    FINALLY BOOSTED!!!

  13. #118
    Join Date
    Mar 2009
    Location
    North Aurora, IL
    Age
    49
    Posts
    11,838
    Happy dance bro!


    Sent from The White House on taxpayers dimes.





    Great quotes!!
    Quote Originally Posted by CBT View Post
    you were too busy getting your ass kicked by cool people because you suck and are a worthless excuse for a human being.
    Quote Originally Posted by CBT View Post
    I'm going to punch you so hard between the legs your going to need a GYNA BO to fix it!!
    Quote Originally Posted by Haggis View Post
    Eat poo poo and die heathen.

Page 8 of 8 FirstFirst 12345678

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 26
    Last Post: 05-09-2012, 05:34 PM
  2. boost limiting valve for centrifugal's
    By ntd in forum Power Adders
    Replies: 40
    Last Post: 12-22-2010, 06:14 AM
  3. Replies: 10
    Last Post: 10-10-2006, 06:57 PM
  4. How Much Boost on Standard Pulley????
    By Smokie in forum Trilogy Motorsports
    Replies: 21
    Last Post: 06-29-2005, 05:23 PM
  5. Marauder S Pulley combo?
    By 89lxbill in forum Kenny Brown
    Replies: 4
    Last Post: 01-17-2004, 12:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •