Results 1 to 15 of 15

Thread: Offset question on wheels

  1. #1
    Join Date
    Feb 2015
    Location
    South Florida
    Posts
    1,117

    Offset question on wheels

    I was looking at a used set of iroc type black wheels that are 22x10 with 45 millimeters offset. Would they pop out too much in the front? Feed back is welcome. The price is is good with tires.
    Last edited by Gerry24; 10-19-2016 at 09:30 PM.

    Righteous Indignation
    03 300A
    4055 of 7838
    4054 of 7093 in Black.
    Born 8/23/02
    Adopted in 1/15
    SOLD

  2. #2
    Join Date
    Feb 2015
    Location
    South Florida
    Posts
    1,117
    These are the wheels.
    Last edited by Gerry24; 05-31-2018 at 12:46 PM.

    Righteous Indignation
    03 300A
    4055 of 7838
    4054 of 7093 in Black.
    Born 8/23/02
    Adopted in 1/15
    SOLD

  3. #3
    Join Date
    Oct 2010
    Location
    4 miles from insanity and 2ft from broke!
    Posts
    9,559
    45mm is a perfect offset on a 10" wheel , they will tuck within the fender nicely.
    04 MERCURY MARAUDER build date:02/11/04
    ITS ALIVE !!!!!!!!

    STAY TUNED!!!!!!!!!!

    **WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP

    VISIT MY GARAGE FOR A FULL LIST OF MODS

  4. #4
    Join Date
    Feb 2015
    Location
    South Florida
    Posts
    1,117
    I appreciate that MoTown

    Righteous Indignation
    03 300A
    4055 of 7838
    4054 of 7093 in Black.
    Born 8/23/02
    Adopted in 1/15
    SOLD

  5. #5
    Join Date
    Oct 2010
    Location
    4 miles from insanity and 2ft from broke!
    Posts
    9,559
    Quote Originally Posted by Gerry24 View Post
    I appreciate that MoTown
    I just ordered a set of 20X10s for the front with a 45mm offset ,you will be happy with the fit.
    04 MERCURY MARAUDER build date:02/11/04
    ITS ALIVE !!!!!!!!

    STAY TUNED!!!!!!!!!!

    **WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP

    VISIT MY GARAGE FOR A FULL LIST OF MODS

  6. #6
    Join Date
    Oct 2004
    Location
    Cape Cod, MA
    Age
    67
    Posts
    2,601
    Quote Originally Posted by MOTOWN View Post
    45mm is a perfect offset on a 10" wheel , they will tuck within the fender nicely.
    What offset & width are you running in the rear ?
    What size tires front & rear ?
    2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
    2003 marauder black 28,000 miles all stock. Garage Queen.
    2004 marauder red daily driver.

  7. #7
    Join Date
    Oct 2010
    Location
    4 miles from insanity and 2ft from broke!
    Posts
    9,559
    Quote Originally Posted by burt ragio View Post
    What offset & width are you running in the rear ?
    What size tires front & rear ?
    The new rear wheels will be a mini tub job I'm running a 20X14 on a +40MM offset , keep in mind I'm also installing a 9" ford rear end narrowed to accommodate the wheels so the offset of the wheels doesn't matter the way it would on a stock Marauder.
    04 MERCURY MARAUDER build date:02/11/04
    ITS ALIVE !!!!!!!!

    STAY TUNED!!!!!!!!!!

    **WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP

    VISIT MY GARAGE FOR A FULL LIST OF MODS

  8. #8
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,737
    Can you tell him/us for a stock Marauder?


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  9. #9
    Join Date
    Sep 2006
    Location
    TRENTON NJ
    Age
    56
    Posts
    711
    Quote Originally Posted by 1Marauder View Post
    Can you tell him/us for a stock Marauder?
    The stock rim is a 50mm offset running a 245/55/18 in rear and 235/50/18 in front

    I run boss 328 chrome rims at a 40mm offset with stock size fronts and 265/50/18 rear and they sit nice.

    So if he runs 45mm offset he will be in the range
    DEAN

    TRENTON NJ

    03 300A MARAUDER
    BLACK THE ONLY COLOR

    BORN 6/24/02 VIN 617134 #1844




    VIST MY GARAGE



  10. #10
    Join Date
    Nov 2006
    Location
    Ogden Utah
    Age
    42
    Posts
    2,181
    Quote Originally Posted by 1Marauder View Post
    Can you tell him/us for a stock Marauder?
    There is a pretty wide range of offsets that can be used, my set up is 20X8.5 +40 F and 20X10 +35 with 245/35 and 275/35's. The offset will just determine how wide of tires you can run. I have ran a 255/35 and 285/30 but with my offsets it was as wide as I could manage. But each of these cars sit just a bit different so the only way to really check with wide set ups is to try
    2003 300A
    Build date 9/27/02
    Sequence# 5244 of 7839
    I have a few things done to it, Eaton swap next!
    1993 Ford Taurus SHO-Every bolt on available...Awaiting a Turbo
    2008 Ford F350 SD
    1974 Ford F350 SCS
    2011 Ford Flex Titanium, Ecoboost
    www.cardomain.com/id/shofast
    If you don't stand behind our troops; please feel free to stand in front of them!

  11. #11
    Join Date
    Oct 2005
    Location
    West 'burbs Chicago
    Age
    36
    Posts
    3,823
    No matter the offset, a 10" wheel up front will stick out too much.
    -----------------------------------------------------------------------------------

    '04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
    '21 F150 XLT 5.0 Sport
    '18 Chevy Malibu Redline
    '15 Mustang GT, performance package
    '01 BMW 740i M-Sport, manual swapped
    '97 Lincoln Town Car (black on black)
    '10 Harley Ultra Limited
    '08 Kawasaki ZX6R
    '03 Grand Marquis(sold)

  12. #12
    Join Date
    Oct 2010
    Location
    4 miles from insanity and 2ft from broke!
    Posts
    9,559
    Quote Originally Posted by ChiTownMaraud3r View Post
    No matter the offset, a 10" wheel up front will stick out too much.
    This statement couldn't be more incorrect , clearly you have no personal experience with what your attempting to speak on.
    04 MERCURY MARAUDER build date:02/11/04
    ITS ALIVE !!!!!!!!

    STAY TUNED!!!!!!!!!!

    **WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP

    VISIT MY GARAGE FOR A FULL LIST OF MODS

  13. #13
    Join Date
    Oct 2005
    Location
    West 'burbs Chicago
    Age
    36
    Posts
    3,823
    Quote Originally Posted by MOTOWN View Post
    This statement couldn't be more incorrect , clearly you have no personal experience with what your attempting to speak on.
    To some, if it sticks out any more than stock it is too much.. so statement stands.

    Besides, there's no way a 10 inch wide wheel with a +45 offset is not sticking out over stock. It will be around more than 1 inch farther out. If you don't think it looks ghetto, then go for it.
    -----------------------------------------------------------------------------------

    '04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
    '21 F150 XLT 5.0 Sport
    '18 Chevy Malibu Redline
    '15 Mustang GT, performance package
    '01 BMW 740i M-Sport, manual swapped
    '97 Lincoln Town Car (black on black)
    '10 Harley Ultra Limited
    '08 Kawasaki ZX6R
    '03 Grand Marquis(sold)

  14. #14
    Join Date
    Oct 2010
    Location
    4 miles from insanity and 2ft from broke!
    Posts
    9,559
    Quote Originally Posted by ChiTownMaraud3r View Post
    To some, if it sticks out any more than stock it is too much.. so statement stands.

    Besides, there's no way a 10 inch wide wheel with a +45 offset is not sticking out over stock. It will be around more than 1 inch farther out. If you don't think it looks ghetto, then go for it.
    Ill get right on that!
    04 MERCURY MARAUDER build date:02/11/04
    ITS ALIVE !!!!!!!!

    STAY TUNED!!!!!!!!!!

    **WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP

    VISIT MY GARAGE FOR A FULL LIST OF MODS

  15. #15
    Join Date
    Jun 2003
    Location
    Timbuk3, MI
    Posts
    2,441

    Arrow

    For your listening pleasure, reading enjoyment, and reference ...


    Last edited by gdmjoe; 06-07-2017 at 06:15 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wanted To Buy '98-'02 16" steel wheels
    By defflepp1 in forum Other Parts/Misc. Wanted
    Replies: 1
    Last Post: 10-14-2016, 06:31 PM
  2. Administrative question...
    By Architect in forum Site Questions and Suggestions
    Replies: 9
    Last Post: 10-05-2016, 06:40 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •