Results 1 to 10 of 10

Thread: picture request : rear setting @ lowest

  1. #1
    Join Date
    Nov 2005
    Location
    Vancouver, BC
    Age
    38
    Posts
    41

    picture request : rear setting @ lowest

    any pics of how low u can sit the azz of these cars?
    Want To Buy a Black 03/04 Marauder
    Current 1989 Tbird SC blk 5spd For Sale
    www.cardomain.com/id/limmer04

  2. #2
    Quote Originally Posted by WTBBLKMAR
    any pics of how low u can sit the azz of these cars?



    It still has another 1/2 an inch or so. It can go down even lower but you need to modify the axle bumpers.

  3. #3
    MNMarauder Guest
    is the front lowered in this picture?

  4. #4
    Join Date
    Oct 2005
    Location
    Cleveland, Ohio and sometimes South Jerz
    Posts
    1,460
    Wow I wish i could do that but the car is too long for these evil cenevil ramps they call entrances. Are you using coilovers and modded bag height or springs and modded bag height?

    2005 Satin White Pearl Legacy GT
    *Stage 2.5* 13.5 @ 96 MPH
    2003 Black 300A <---Click for pics.
    *Totaled *


  5. #5
    Quote Originally Posted by MNMarauder
    is the front lowered in this picture?
    The front is at stock height. The rears are larger tires, 255/55/18, and the car was 1/2 inch away from hitting the axle bumpers. I modified the axle bumpers and brought the car up a little more. Stock bags, all you need to do is adjust the height sensor.

  6. #6
    Join Date
    Nov 2002
    Location
    Off-Shore America
    Posts
    10,219
    Quote Originally Posted by WTBBLKMAR
    any pics of how low u can sit the azz of these cars?
    Peek at this...
    http://www.mercurymarauder.net/showc...c=3&userid=392

    Front OEM coils cut one full coil, OEM shocks replaced @20K miles, Addco sway bar, poly bushings. 245/45/18 tire.

    Rear: Z&M upper and lower control arms, OEM bushings, Addco sway bar, poly bushings, OEM shocks replaced @ 20K miles, air suspension set to factory defaults, modified bump stops, 285/45/18 tires.

    Front jack point is 4.50" off the ground, rear jack point is 5.0"

    The ride is superb, control is remarkable, the car launches flat, without any loss to body roll, but it will get nervous on older urban pavements.

  7. #7
    Join Date
    Oct 2005
    Location
    Cleveland, Ohio and sometimes South Jerz
    Posts
    1,460
    Was there a how-to yet on modding the height sensors?

    2005 Satin White Pearl Legacy GT
    *Stage 2.5* 13.5 @ 96 MPH
    2003 Black 300A <---Click for pics.
    *Totaled *


  8. #8
    Quote Originally Posted by merc6
    Was there a how-to yet on modding the height sensors?
    See: http://www.mercurymarauder.net/forum...93&postcount=8

  9. #9
    Join Date
    Oct 2005
    Location
    Cleveland, Ohio and sometimes South Jerz
    Posts
    1,460
    Quote Originally Posted by Rider90
    Sweet! thanks. Turning air suspention off before would be a good idea right?
    Last edited by merc6; 12-05-2005 at 12:19 PM.

    2005 Satin White Pearl Legacy GT
    *Stage 2.5* 13.5 @ 96 MPH
    2003 Black 300A <---Click for pics.
    *Totaled *


  10. #10
    Quote Originally Posted by merc6
    Sweet! thanks. Turning air suspention off before would be a good idea right?
    Turn it off anytime your rear tires are off the ground.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Window Tint
    By PAPAJOHN in forum Community Discussion
    Replies: 15
    Last Post: 11-11-2010, 04:31 PM
  2. My rear is lumpsided
    By adrian36 in forum Community Discussion
    Replies: 21
    Last Post: 11-10-2004, 08:03 PM
  3. MM rear axle type? and request for MM engine picture..
    By Brett in forum Community Discussion
    Replies: 2
    Last Post: 12-04-2002, 06:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •