Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 46

Thread: Trilogy parts

  1. #31
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by Stealthrider View Post
    I know this is old, but what happened to this? Was any progress made or is it dead?
    Yeah, Chris! What he said!

    Tippy says, if you build it they will come!

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  2. #32
    Join Date
    Sep 2006
    Location
    Louisville, KY
    Age
    42
    Posts
    1,382
    In for details.
    03 Marauder- 300B, non heated seats, T/C, no CD changer
    03 Marauder- 300A, Eaton Swapped, SOLD

    03 Marauder- 300A, 5544 of 7839 in 03, Trilogy #24, SOLD
    04 Marauder- 300B, SB with LF interior, 208k miles and still ticking SOLD

  3. #33
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    I attempted a drivers side inlet for an eaton many many years ago. It was nearly impossible

  4. #34
    Join Date
    Sep 2006
    Location
    Psych ward
    Age
    53
    Posts
    1,081
    The problem with the trilogy inlet, it becomes a restriction when wanting to make 600 RWHP and up, the inlet isn't big enough, so if your looking at coping or making one, make it bigger and better if possible.

    I think cobra swaps are good when using a whipple on top,but if you want Drivers side inlet look into the Cobra Engineering kit which will allow you to use and blower for a shelby 07-14 whipple, TVS etc.......and keep it on the drivers side.
    • 82 GT coyote swap started
    • 03 300a Marauder, stroked,cammed,T/S Trilogy Supercharged # 216,Best Et 10.77@129.72 on slicks, 93 pump gas. driven to the track.
    • 2011 GT 500, 3.4 whipple,93 pump gas,10.47@133,Driven to the track.
    • 2003 azura blue Mach 1, cobra motor,2.9 Whipple,crusher inlet,built 4r70w trans,04 IRS rear.full weight street car, Corn Fed

  5. #35
    Join Date
    Feb 2017
    Location
    Chicago, Illinois
    Posts
    318
    Been hearing a lot about this "Jerry". Who is he?

  6. #36
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by NorthShoreChiMM View Post
    Been hearing a lot about this "Jerry". Who is he?


    Just some internet chic..

    https://www.mercurymarauder.net/foru...play.php?f=140


    Sent from my iPhone using Tapatalk
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  7. #37
    Join Date
    Sep 2006
    Location
    Louisville, KY
    Age
    42
    Posts
    1,382
    There are two Jerry's worth mentioning. Jerry Barnes is the owner of Trilogy Motorsports who made the S/C kit for the MM's. Jerry Irwin is the guy who makes the brake brackets, awesome sauce, muffler bearings, premium blinker fluid, and many other things and that's who Bob linked in his post.
    03 Marauder- 300B, non heated seats, T/C, no CD changer
    03 Marauder- 300A, Eaton Swapped, SOLD

    03 Marauder- 300A, 5544 of 7839 in 03, Trilogy #24, SOLD
    04 Marauder- 300B, SB with LF interior, 208k miles and still ticking SOLD

  8. #38
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    LJI is dreamy.......


    Sent from my iThrone using Tapatalk
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  9. #39
    Join Date
    Jun 2012
    Location
    Grand Rapids
    Posts
    3,833
    Quote Originally Posted by NorthShoreChiMM View Post
    Been hearing a lot about this "Jerry". Who is he?
    Gay guy from the East side of Michigan... no need to go any further...
    #2941 300A
    4.10's, carbon clutches
    Marty O Tune
    Curless Cure
    Widened Wheels
    Dead Pedal
    Eaton Swapped

    Bar tender and maker of:
    Christmas in a cup
    The "Bucket of South Haven Iced Tea"
    One Legged Lesbian Kickboxer
    Cocka Two

  10. #40
    Join Date
    Feb 2017
    Location
    Chicago, Illinois
    Posts
    318
    The responses are funnier than expected. U guys are hilarious

  11. #41
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by Curless View Post
    Gay guy from the East side of Michigan... no need to go any further...


    It's not gay if dick's don't touch.


    Sent from my iThrone using Tapatalk
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  12. #42
    Join Date
    Oct 2005
    Location
    West 'burbs Chicago
    Age
    36
    Posts
    3,823
    Quote Originally Posted by Spectragod View Post
    It's not gay if dick's don't touch.


    Sent from my iThrone using Tapatalk
    What if he looks you in the eye?
    -----------------------------------------------------------------------------------

    '04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
    '21 F150 XLT 5.0 Sport
    '18 Chevy Malibu Redline
    '15 Mustang GT, performance package
    '01 BMW 740i M-Sport, manual swapped
    '97 Lincoln Town Car (black on black)
    '10 Harley Ultra Limited
    '08 Kawasaki ZX6R
    '03 Grand Marquis(sold)

  13. #43
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by ChiTownMaraud3r View Post
    What if he looks you in the eye?
    I only have one eye.... would that make a difference? Jerry did say he liked staring into my brown eye. I thought it was more hazel, but I guess it's brown.
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  14. #44
    Join Date
    Aug 2014
    Location
    West Boylston, ma
    Posts
    315
    Quote Originally Posted by Curless View Post
    I am wondering if any of you out there has a Trilogy blower elbow and inlet (the part that the throttle body and IAC bolt to) that I could borrow for a bit? I am wanting to take some accurate measurements of them...I have an idea...
    I have one I can sell you. It's attached to a 21k mile Marauder.

  15. #45
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by Drewstang View Post
    There are two Jerry's worth mentioning. Jerry Barnes is the owner of Trilogy Motorsports who made the S/C kit for the MM's. Jerry Irwin is the guy who makes the brake brackets, awesome sauce, muffler bearings, premium blinker fluid, and many other things and that's who Bob linked in his post.
    Yep! 1 Jerry is an awesome guy that made an awesome SC kit!

    The other Jerry is an awesome guy that shaves metal like no other can...

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wanted To Buy Trilogy parts
    By J-MAN in forum Marauder Parts/Misc. Wanted
    Replies: 3
    Last Post: 03-11-2013, 12:30 PM
  2. For Sale stock parts from trilogy install
    By txmarauder in forum Marauder-specific Parts for Sale
    Replies: 11
    Last Post: 04-05-2012, 08:50 PM
  3. For Sale Boneyard 04 TRILOGY MARAUDER Parts (Ebay)
    By NXSBOB in forum Marauder-specific Parts for Sale
    Replies: 31
    Last Post: 03-05-2012, 06:52 PM
  4. Trilogy parts for life
    By Bradley G in forum Power Adders
    Replies: 2
    Last Post: 12-08-2011, 09:34 PM
  5. F.S., Left over parts from Trilogy install
    By Spectragod in forum Marauder-specific Parts for Sale
    Replies: 3
    Last Post: 07-10-2009, 04:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •