I decided to copy the various setups to the first post for easier reference. The setups are organized by RWHP.
This list is starting to look good. Thanks to those who have contributed. Hopefully we can get others to share their setups.
I decided to copy the various setups to the first post for easier reference. The setups are organized by RWHP.
This list is starting to look good. Thanks to those who have contributed. Hopefully we can get others to share their setups.
Recent new owner of a 2004 SBRIP 2003 Black 300A
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
I was trying to get a feel for the relationships between compresion ratio, boost, and HP and ended up creating a table for the setups we have so far. I realize the chart below the table, which charts boost vs HP, is to a large extent useless as there are too many factors not accounted for, but I am throwing it there hoping to generate more discussion.
Thoughts?
Recent new owner of a 2004 SBRIP 2003 Black 300A
Very nice BUBS!^^^^^^^^^^^^
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Looks great!
My compression is 10:1
Water/Meth
More boost soon.
PROCHARGER SUPERCHARGER FROM F.I.T. # 007
18psi pulley
MMR built Stroker 5.0+.020 overbore
Forged Crank/Manley Rods/Manley Pistons
Billet Oil Pump
ARP Bolts and head studs
Snow Methanol Injection
3500 Stall Converter (PI)
Stryker 340 Fuel Pump
45 lbs Injectors
4:10 gears
K&N Air Filter
Factory Spoiler
Widened Wheels
Nittos
170 deg thermostat
SS Inserts
Daniel's Colex Billet Supercharged Emblems front and rear
Trunk organizer
Here's another nice centri combo from Loco1234. Almost 22PSI with a CR of 10.1 and 93 octane fuel! He tells me he has another dyno session comming up where timing will be readjusted. Expecting even more power!
1) RWHP and Torque? 623rwHP & just shy of 600rwTQ
2) Engine and Compression? Motor re-BUILT to 5.0L / Comression ratio 10.1:1
3) Amount of boost at X RPMs? 21.7PSI at max aprox 6000rpm & was still climbing with rpm
4) Type of Blower? Vortech JT-trim
5) Pulley Combo / 6-Rib or 8-Rib? 6-rib, S/C Pulley ____, Crank is stock (no under drive)
6) Tensioner type? 3 bolt all metal cobra tensioner with cobra front cover
7) Ported Heads? Yes, complete stage 3 head cnc ported
8) Cams? Stock
9) What intake? Stock upper & lower
10) Intercooler? Vortec Air-water inter-cooler system custom air-water with post intercooler to pre centri Bypass valve (not Blow off), froozen boost upgrades
11) Exhaust Combo? full 3" SSW exhaust
12) Fuel / Degrees of timing? 93 Octane / Degrees of timing______
Last edited by Jeronimojc; 08-06-2014 at 09:03 AM.
Recent new owner of a 2004 SBRIP 2003 Black 300A
1) RWHP and Torque? 441HP/379TQ(Not 100% sure about tq)
2) Engine and Compression? Stock 10:1 CR
3) Amount of boost at X RPMs? 10 PSI at 6500 (?)
4) Type of Blower? D1SC
5) Pulley Combo / 6-Rib or 8-Rib? 4.0" pulley and stock 6-rib pulleys
6) Tensioner type? Tensioner type - stock, added Zack's extra pulley to the timing cover
7) Ported Heads? Stock heads
8) Cams? Stock cams
9) What intake? Stock
10) Intercooler? Procharger A/A intercooler
11) Exhaust Combo? Rear cat deletes, Magnaflow Mufflers.
12) Fuel / Degrees of timing? Fuel - 93 octane, Aeromotive 340, BAP(Set on 0), 60lb injectors, not sure about timing.
2003 Black/Light Flint MM, PROCHARGER D1SC#30, 4.10 GEARS, REAR COOLING MOD, ZACK BIG BRAKE KIT, 3500 STALL, WIDENED REAR WHEELS.
1993 MUSTANG LX HATCH, 347 STROKER, 3.73 GEARS, TUBULAR K MEMBER, TKO 3550 TRANNY, AEROSPACE DUAL PISTON BREAKS.
^^^ I like it. Simple, effective, and I bet reliable! Thanks for sharing. I'll add it to post #1
Sent from my iPhone using Tapatalk
Recent new owner of a 2004 SBRIP 2003 Black 300A
Yet another very impressive setup! This actually made it to the top of the list in post 1. New numbers are in the works with a 10% OD pulley.
jflave's setup:
1) RWHP: 717 HP, 620 Torque
2) Engine and Compression: Stock stroke 9.3:1 forged WAP
3) Amount of boost: 21 psi at 6500 RPM. Hit limiter.
4) Type of Blower: Novi 2200SL
5) Pulley Combo: Blower pulley 2.75", Stock crank pulley
6) Tensioner type: Marauder timing cover with single bolt tensioner
7) Ported Heads? Foxlake Ported Heads
8) Cams? GT500 cams crower springs
9) What intake: Stock Marauder Intake twin blade accufab
10) Intercooler: A2A intercooler
11) Exhaust Combo: Kooks 1 3/4 long tube 3" collector 3" the rest of the way
12) Fuel: Shell urt 116 race fuel
Recent new owner of a 2004 SBRIP 2003 Black 300A
A while back I read various setups to see how much boost people were getting with their pulley combinations. I took that info and used it to develop a spreadsheet for my own use to estimate boost (for both stock crank pulley and a 10% OD crank pulley). I thought some of you may find this useful. Please keep in mind this is only an estimate based on some empirical info and ratios for a D1SC and engine RPM of 6,500. This also assumes little or no belt slip. At some point the Maximum Impeller Speed becomes a factor. I believe the D1SC Max Impeller Speed is 62,000.
Last edited by Jeronimojc; 11-05-2014 at 05:09 PM.
Recent new owner of a 2004 SBRIP 2003 Black 300A
Actually my info needs to be updated I'm at 761rwhp @26psi , S/C pulley is 3.0 , and crank pulley is an Innovators west 18% o/d 7 3/4"
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Awesome! I'll update soon.
Sent from my iPhone using Tapatalk
Recent new owner of a 2004 SBRIP 2003 Black 300A
There are currently 1 users browsing this thread. (0 members and 1 guests)