Results 1 to 4 of 4

Thread: Drive Motor Gear - Rotisserie

  1. #1
    Join Date
    Sep 2005
    Location
    Buffalo, NY
    Age
    59
    Posts
    2,655

    Drive Motor Gear - Rotisserie

    Hi All. I am reaching out to our vastly diverse group to see if we can find a part for my rotisserie. There are two plastic gears in a low RMP, high torque motor, and one stripped out. All the rest are steel.

    I have had no luck finding one out there, but it must exist. I would love to replace it with some sort of steel, but the plastic one worked for a long time, until I tried to rotate an overbuilt stainless drum for two days.... smoking corn over cherry wood for our smoked whiskey.

    It is a dual gear, small gear is 11 tooth and 7.50 mm diam. Large gear is 60 tooth and 37.00 mm in diam. Overall thickness is 6.70 mm.

    I'll post up a picture as soon as I can.

    Someone into robotics, engineering, RC racing ??

    Thanks all
    Built: 3/16/2004
    Number 9,879 of 11,052 for Total Production
    Number 2,040 of 3,213 for 2004 Model Year
    Number 663 of 980 Dark Toreador Red Produced
    Dark Charcoal Interior - CD Changer - Heated Seats - Trunk Oganizer - Moonroof - Rear Deck Spoiler
    Trilogy S/C kit #224 installed August 2010
    Detroit Tru-Trac 31 spline with 4.10 gearset
    Must - Go - Faster !

  2. #2
    Join Date
    Sep 2005
    Location
    Buffalo, NY
    Age
    59
    Posts
    2,655
    Here are a couple pics of the failed gear.
    Attached Images Attached Images
    Built: 3/16/2004
    Number 9,879 of 11,052 for Total Production
    Number 2,040 of 3,213 for 2004 Model Year
    Number 663 of 980 Dark Toreador Red Produced
    Dark Charcoal Interior - CD Changer - Heated Seats - Trunk Oganizer - Moonroof - Rear Deck Spoiler
    Trilogy S/C kit #224 installed August 2010
    Detroit Tru-Trac 31 spline with 4.10 gearset
    Must - Go - Faster !

  3. #3
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    Try www.martinsprocket.com. They also build custom
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  4. #4
    Join Date
    Sep 2005
    Location
    Buffalo, NY
    Age
    59
    Posts
    2,655
    Ha, to have a gear or two made...... I could buy a two new motors.....

    Just picked up two used ones for cheap.

    Here, I thought it would be a common part.
    Built: 3/16/2004
    Number 9,879 of 11,052 for Total Production
    Number 2,040 of 3,213 for 2004 Model Year
    Number 663 of 980 Dark Toreador Red Produced
    Dark Charcoal Interior - CD Changer - Heated Seats - Trunk Oganizer - Moonroof - Rear Deck Spoiler
    Trilogy S/C kit #224 installed August 2010
    Detroit Tru-Trac 31 spline with 4.10 gearset
    Must - Go - Faster !

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 4
    Last Post: 04-22-2010, 07:44 AM
  2. Pushing hard to get it up in drive gear.
    By scippy in forum Shop Talk
    Replies: 3
    Last Post: 09-19-2009, 09:42 PM
  3. The rotisserie turned too slow
    By dwasson in forum The Lounge
    Replies: 3
    Last Post: 03-24-2006, 01:03 PM
  4. Motive Gear Performance 3.90 gear set
    By rayjay in forum Shop Talk
    Replies: 8
    Last Post: 01-02-2006, 08:56 AM
  5. 460 Ford Motor (1972 Police Intercepter Motor)brand New!
    By hitchhiker in forum Community Discussion
    Replies: 11
    Last Post: 01-03-2005, 08:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •