Page 1 of 3 123 LastLast
Results 1 to 15 of 35

Thread: Screwed by twins!!!

  1. #1
    Join Date
    Apr 2008
    Location
    HOME OF THE BRAVE!
    Age
    47
    Posts
    7,359

    Screwed by twins!!!

    Gentlemen... I would first like to request, if I can shuffle my chair somewhere between and within the Heavy Hitters area. UPS delivered a very heavy heavy item that broke the UPS Deliverer's pants belt. It arrived as I left for work, and it's my TRILOGY TWINSCREW!!!!! Unfortunately it will not be installed till the T/S is paid off first, then the second step begins, $aving $$$ for the installation. Please be patient with me, I have many questions as my Trilogized journey begins.
    "Damned if I do, damned if I don't!"
    Member #8831

    MERIDEATH aka "Purrrty Mean" was born on June 20, 2002.
    Production #1685 of 7,838 and is #1685 of 7093 Black Beasts.
    Delivered July 27th 2002, she revealed herself.
    Unable to be tamed by her 1st owner, she was left to roam about & raid in search of plunder.
    Through the pillage she became mine on January 23, 2008 and since then...
    "She's tryin' to make a Devil out of me!"
    -"TaKe 'Em D0wN!" TRILOGY TwinScrew #209 / TS0019-

  2. #2
    Join Date
    Apr 2003
    Location
    Rock N' Roll Hell
    Age
    38
    Posts
    15,325
    Ummmmmmm Andrew will that be okay on a stock engine?

    Take it to Zack for the install. He will have it done in days, not weeks like other speed shops.

    Congrads! You'll kill me when it's installed. Welcome to the world of boost. I know your wife will love it too.
    "Bye Bye, Johnny B. Goode."

  3. #3
    Join Date
    Apr 2008
    Location
    HOME OF THE BRAVE!
    Age
    47
    Posts
    7,359
    ^^^ As long as I keep a safe tune from my understanding. Now I gotta hide the keys from the wife, thanks for the reminder Dom... LOL!
    "Damned if I do, damned if I don't!"
    Member #8831

    MERIDEATH aka "Purrrty Mean" was born on June 20, 2002.
    Production #1685 of 7,838 and is #1685 of 7093 Black Beasts.
    Delivered July 27th 2002, she revealed herself.
    Unable to be tamed by her 1st owner, she was left to roam about & raid in search of plunder.
    Through the pillage she became mine on January 23, 2008 and since then...
    "She's tryin' to make a Devil out of me!"
    -"TaKe 'Em D0wN!" TRILOGY TwinScrew #209 / TS0019-

  4. #4
    Join Date
    Apr 2003
    Location
    Rock N' Roll Hell
    Age
    38
    Posts
    15,325
    I think you have to modify your hood to fit that set up. I am not completely sure though.

    Good luck and have fun!
    "Bye Bye, Johnny B. Goode."

  5. #5
    Join Date
    Feb 2006
    Location
    Tinley Park IL
    Age
    62
    Posts
    2,772
    Quote Originally Posted by takedown View Post
    Gentlemen... I would first like to request, if I can shuffle my chair somewhere between and within the Heavy Hitters area. UPS delivered a very heavy heavy item that broke the UPS Deliverer's pants belt. It arrived as I left for work, and it's my TRILOGY TWINSCREW!!!!! Unfortunately it will not be installed till the T/S is paid off first, then the second step begins, $aving $$$ for the installation. Please be patient with me, I have many questions as my Trilogized journey begins.
    Good luck and enjoy the boost
    I am the master of my fate, I am the captain of my soul.
    And so are you - Have a day better than yesterday

  6. #6
    Quote Originally Posted by Motorhead350 View Post
    I think you have to modify your hood to fit that set up. I am not completely sure though.

    Good luck and have fun!
    http://www.classglassperformance.com...0cr%20vic.html

    2004 Silver Birch
    300B
    Build date:9/29/2003, Adopted on 12/02/05
    Exhaust by Greg
    13.630 @ 100.49 mph (11/21/10)

    2015 Ford Focus SE Sport FWD
    2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
    2010 Ford Fusion Sport FWD
    1989.5 Ford Mustang 5.0 LXsport

  7. #7
    Join Date
    Sep 2007
    Location
    townsend DE
    Age
    35
    Posts
    12,474
    shouldnt have to mod the hood, ask spectragod, maybe just remove the hood liner. anyway congrats! thats a hell of alot of blower on pos stock rods
    2010 fusion se


  8. #8
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    You'll be just fine with a safe tune, it was made for a stock engine. Just don't pulley the thing down too far. Enjoy brother!
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  9. #9
    Join Date
    May 2005
    Location
    Amissville VA
    Posts
    3,827
    You will enjoy it. Trilogy is a great setup, and the Twin Scren wlil be safe yet have headroom for TONS more boost if you should ever choose to go that way.

    No hood mods needed.

    Congrats to you.
    Trilogy #112 (self installed)

    - Trilogy S/C (Stock pulley/tune) - 4.10's - JLT - SS Inserts - 4" Megs -

    12.99@106.2mph (for now)

  10. #10
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by justbob View Post
    You'll be just fine with a safe tune, it was made for a stock engine. Just don't pulley the thing down too far. Enjoy brother!

    I have a safe tune, 472 RWHP with mine, it will fit under your stock hood, you will not run out of boost, mine was still making power at 6500.

    Do a self install, mine took a couple of days. FYI, You'll pick up 50 more horse with headers and cats.
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  11. #11
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    He's had the stainless headers and cats in his garage since the group buy. He is driving me nuts! Not to mention his built trans, gears, ETC!!! Put that car together allready!
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  12. #12
    Join Date
    Oct 2004
    Location
    Cape Cod, MA
    Age
    67
    Posts
    2,603
    He isn't the only one with a closet basement or garage full of parts waiting to be installed.
    2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
    2003 marauder black 28,000 miles all stock. Garage Queen.
    2004 marauder red daily driver.

  13. #13
    Join Date
    Aug 2009
    Location
    St. Paul MN
    Age
    65
    Posts
    300
    Screwed by twins!!!
    I thought this was going to be whining by a Detroit Tigers fan...
    2003 300A w/ trunk organizer, and 6 Disc CD changer
    VIN 628920 Built 8/8/2002
    Mine on 8/28/09 with 27,400 miles
    K&N CAI
    SCT X3 tune
    Ford Racing 4.10 gears

  14. #14
    Join Date
    Feb 2008
    Location
    Boston
    Age
    40
    Posts
    3,433
    Quote Originally Posted by burt ragio View Post
    He isn't the only one with a closet basement or garage full of parts waiting to be installed.

    You wouldn't be hinting about me.... Would you Burt!


    Congrats drew! I'm very jealous!
    2003 300A
    #4916 of 7839
    N/A Bolt on's
    4:10 Gear's
    Steeda Underdrive Pulleys
    Stewart EMP Waterpump
    K&N CAI
    Sparta Control Arms
    Zack Tune
    TCE SS brakelines
    [LEFT]SS Insert's[/LEFT

  15. #15
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    How can anyone store toys? I'm like a little kid. When I see the UPS guy I immediately point towards the garage, he sets it down, I sign, get out knife, open box, and install! No time wasted!! You guys have some serious self control.
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. I think i'm screwed!
    By sd8683 in forum Tuning
    Replies: 12
    Last Post: 07-22-2009, 07:51 AM
  2. Why did the Sweedish twins try to cross the road?
    By SID210SA in forum The Lounge
    Replies: 12
    Last Post: 09-30-2008, 09:41 PM
  3. 550 + HP and turbo (twins in-fact)...
    By TAF in forum The Lounge
    Replies: 28
    Last Post: 11-03-2004, 08:27 PM
  4. Twins, but not identical
    By FordNut in forum Community Discussion
    Replies: 16
    Last Post: 05-01-2003, 09:13 PM
  5. OT - The Twins are here!
    By Logan in forum Community Discussion
    Replies: 14
    Last Post: 07-30-2002, 08:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •