Do u think it will even tho my cooler doesn't hang beneath the bumper? I had it before because my procharger intercooler was slightly below my bumper and didnt like seeing it
Do u think it will even tho my cooler doesn't hang beneath the bumper? I had it before because my procharger intercooler was slightly below my bumper and didnt like seeing it
04 twin turbo Marauder custom made by myself 😁
3800stall freddy Brown 4stbe trans 31 spline rear
601rwhp 592rwtq @19psi
It is going to take any air that might have slid under the bumper and up or the air damn under the radiator "might" have thrown north bound into it and immediately whisk it off to the sides I thinks.
But I wouldn't touch anything till you've had time to data log IATs as is. If you need to lower them or are just curious you could always remove it and compare your results or even add a fan kit.
Air flow does some seriously strange things at any given speed!!!
I was really concerned about completely altering my radiator in all aspects. I.E. Size, location, elevation, straight up to now tilted, fan, shroud, all 695 plastic trim pieces that direct flow all around and under it, ECT. And for one of the very very few times in my over complicated life it actually worked, pretty much too well in fact. Pure luck. It was really my only "real" hurdle out of doing this last build.
I had it already doomed as a failed idea but I was at a serious loss of other options besides boxing out the sides where it tilts as my next step. Luckily my mental block paid off...
IATs were the ENTIRE idea behind getting away from roots. Well boredom and the desire to be different played a small part as well.
Builder Of Badassery
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Very nice!!! Can't wait to see her running.....
2004 MM (Black) #112 of 3213 (SOLD)
2022 Ford Ff-150 SuperCab Iconic Silver "Powerboost"
3.35 L 4X4
-AND-
SLAYER1
formerly owned by "Impala Slayer!! 2004 SB MM
Kenne Belle 2.8 (Liquid Cooled), MMR "Boss 302" Block, L&M Engines rebuild Kooks Headers and cats, Accusump Pre-Oiler Dynamax VT mufflers, MBS 2 1/2" exhaust, 4.10's, 2800 stall, Argento 312 "Color" Powder coated wheels, Rears widened 1 1/2 "703
702 RWHP/653 RWTQ @ 21 Lbs. Boost, M/M catch can, 3 pillar gauge (Boost, Fuel, air intake and coolant temp, custom console cover, S-55 treatment etc...
Got the cooler mounted, need to notch out the bumper support for the charge air cooler discharge to pass through. Time to order my charge pipes!!
04 twin turbo Marauder custom made by myself 😁
3800stall freddy Brown 4stbe trans 31 spline rear
601rwhp 592rwtq @19psi
At least yours doesn't go right thru the center of the support or so it looks!
Really starting to come together!!
Builder Of Badassery
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
How about removing the fog lamps and installing two smallish cone filters with the K&N dry charge bags on them - 1 for each turbo input?
Yes I know it's a bit crazy...
2021 F150 XLT Super Crew short bed - no chrome! - 3.5 Ecoboost 400hp/500tq - 36 Gal tank (600 miles) - 4x4 FX4 Offroad + Max Tow - 3.55 Locker - 10 Speed - Pro Power 2kva - 24mpg @ 80 Ford is still the best.
03 300A - Number 1727 - Super Touring - 10k in the best upgrades - 13.8@99 N/A - SOLD - STAP was so much fun, loved meeting you all and racing.
Still easier than splitting it in half and lining it all up straight and putting in good beefy metal!
I do wish I would have welded an extension onto the intercooler so the clamp would be easier. Hind sight...
Builder Of Badassery
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Went with Zacks recommendation and got the cxracing piping kit... im shocked with the quality for the price!! 👍
I ended up having to use 3 90 degree bends on each charge pipe . Theyre surprisingly very short tho! Gonna have a bunch of 2.5 in left tomorrow I'll take these into work and roll a bead on the ends i had to cut.
Now for the 3in inlet pipe. Thats gonna be fun. Things are actually starting to get tight.
04 twin turbo Marauder custom made by myself 😁
3800stall freddy Brown 4stbe trans 31 spline rear
601rwhp 592rwtq @19psi
Totally AWESOME!!!!!
Let me know when I can drop off my MM for the same treatment.
Seriously, this install looks top-notch.
1. Black Sunshine (2003A F.I.T #3) (SOLD!)
2. 2004 SAP P71 (Gone)
3. The 2001 P71 (Flying Snow). (Sold)
4. The 1998 P71 Jinbei. (Sold)
5. 1990 5.7L IROC-Z (Sold)
Keeping a black car clean is not a hobby. It's a part-time job.
Support the troops.
Why is it so hard to get a like button on this site??
Builder Of Badassery
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
There are currently 1 users browsing this thread. (0 members and 1 guests)