Looking for a heater control unit.
Any help is appreciated
Sent from my iPhone using Tapatalk
Looking for a heater control unit.
Any help is appreciated
Sent from my iPhone using Tapatalk
I assume you are referring to the EATC module that controls the temp and fan speed? What is the problem? You might find some on Ebay or a junk yard. You can also contact Fastblackmerc he usually has a spare he will sell you for yours if it is not all burned up or too damaged. Hope this helps.
2004 DTR Marauder, #423 of 9806
2004 SB Marauder, SOLD
2003 Black Marauder, #3029 of 7093
2003 Black Supercharged Marauder, #1940 of 7093
2003 DBP Marauder, #225 of 328, SOLD
2007 Black Shelby GT Terlingua
2017 Grabber Blue Mustang GT 5.0
2018 Platinum White King Ranch F150 FX4
Mine works but not fully functional. Heat blows all the time. Some vents won’t open or close
Sent from my iPhone using Tapatalk
Replied to your PM.
Sounds like you have 2 problems.
1-Heat all the time is usually the Blend Door actuator.
FIX: Run the EATC self-test, if you get a 024 or 025 fault code the Blend Door actuator needs to be replaced.
2-The problem with the vents is probably the o-rings in the EATC.
FIX: The o-rings need to be replaced. I offer a repair service for the EATC - new o-rings and LED conversion for the fan & control buttons. Cost is $55.00.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
How do I change the o rings out
Sent from my iPhone using Tapatalk
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
+1 on FBM, he did mine and the result was fantastic, well worth it to send it to him as he's probably done hundreds.
There are currently 1 users browsing this thread. (0 members and 1 guests)