Junior Member
Well I wore them out and called KVR. Good run of 100K no issues however response, was "sorry we do not carry them any more and can't help you." NO effort to help. Stay away from them. Had no info on previous supplier but was really to lazy to find that out. Any thoughts on replacement rotors that would drop in ? They use C4 Corvette calipers. Hate to spend a fortune on another kit but will if I have to, either Willwood or Baer. Thanks, Stan
Turbo Marauder
Try a 2010 GT500 Rotor
Weißbirke Plünderer
Baer no longer makes a kit for marauders. contact member: Curless he used to know where to get replacements
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Contributing Member
DBA makes a replacement rotor, but it won't fit the KVR hats. You have to get hats from Baer.
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
Junior Member
Baer makes a kit ... they just changed design of the front kit.. you'll have to call
60's Street-Strip Racer
Call Todd at TCE. I have had his 14 inch rotors with 6 piston Wilwood calipers for maybe 5+ years and i think they are the best mod i have done. They will stop one of our not so svelte beasts like running into a padded wall. I have never driven any other vehicle including one with brembos that felt so secure on braking.
Sent from my SM-G935T using Tapatalk
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.
Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
Weißbirke Plünderer
they quit making their big brake kit for 03,04 marauders...what info do you have ?Originally Posted by moola94
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Junior Member
Hello Stan, Give me a call I have replaced my KVR rotors and also the GT500 Rotors may work you will have to re shim the mounting points. Sent you PM with my phone number.
Russ
Russ, Monroe NC.
Senior Member
I have KVRs. Send a PM to Curless I beleive the rotors are 2004 vette rotors but ask for sure. I knwo the calipers are.
Steven
2004 Marauder Black, loaded
Vortec S/C
4.10s
3500 PI Stall
Kook's headers
476.9 rwhp 385 lbs/tq
KVR's, QA1's, M&Z control arms, rear sway bar
Lidio tune
2004 Suburban Dark Charcoal
1970 W-30 442 convertible twilight Blue
Everything Marauder, LEDs & HI
+1!
IMHO... the best mod for a Marauder.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Senior Member
Vette calipers, the rotors are almost identical to the GT500 rotors. We got your rotors through a Michigan Manufacturer of racing rotors. They are available just need to know how to go about it. Thats what we did on your car Steve.
http://www.colemanracing.com/Brakes-C94.aspx
#2941 300A
4.10's, carbon clutches
Marty O Tune
Curless Cure
Widened Wheels
Dead Pedal
Eaton Swapped
Bar tender and maker of:
Christmas in a cup
The "Bucket of South Haven Iced Tea"
One Legged Lesbian Kickboxer
Cocka Two
Junior Member
Does anyone know what the service limit is for thickness ? New I believe they were 1.25 inches. I may have found a used resurfaced set just want to make sure they are usable before I shell out $$$. Thanks, Stan
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
