New Products: Custom 4V Coil covers

[Tucker]

These new custom Coil Covers from Fore Precision are awesome.
We are a stocking dealer and have many sets ready to go.

Here's what they have:

<!-- InstanceEndEditable --><!-- InstanceBeginEditable name="EditReg_main" -->Ultra Low Profile Coil Covers Fits: Ford modular four valve V-8 engines

These coil covers are machined from 6061-T6, andodized black, then chamfered and engraved to reveal the shiny aluminum below. The contrast is astounding.
The Ultra Low Profile Coil covers are 3.5mm shorter than the stock covers while allowing the same clearance under the covers. These coil covers bolt on with included 316 stainless steel hex head bolts without any modification. The use of the OEM coil cover gasket is maintained making these a hassle free bolt on that retains complete factory reliability.

Tall Coil Covers
Fits: Ford modular four valve V-8 engines with stock or GMS ignition coils
These coil covers are machined from 6061-T6, andodized black, then chamfered and engraved to reveal the shiny aluminum below. The contrast is astounding.
The Tall Coil covers are roughly 1/4" taller than the stock covers while allowing connector clearance for aftermarket GMS coil kits. These coil covers bolt on with included 316 stainless steel hex head bolts without any modification. The use of the OEM coil cover gasket is maintained making these a hassle free bolt on that retains complete factory reliability, unlike the spacer that deletes the OEM gasket, allowing debris to accumulate in the spark plug wells.
<NOSCRIPT></NOSCRIPT><SCRIPT language=JavaScript><!--var SymRealOnLoad;var SymRealOnUnload;function SymOnUnload(){ window.open = SymWinOpen; if(SymRealOnUnload != null) SymRealOnUnload();}function SymOnLoad(){ if(SymRealOnLoad != null) SymRealOnLoad(); window.open = SymRealWinOpen; SymRealOnUnload = window.onunload; window.onunload = SymOnUnload;}SymRealOnLoad = window.onload;window.onload = SymOnLoad;//--></SCRIPT>

<NOSCRIPT></NOSCRIPT>Here's what we can do.
They come blank or with engraving. Normally the engraving is on the driver side, but if there is interest I can get a batch done on the passanger side for the Marauder. We can also do some engraving bare aluminum coil covers, media blasting, then clear anodizing, for contrasting colors to your black valve covers.
So they run:
$130 blank (Black or clear/silver)
$145 with engraving

Blank (black) sets are in stock and shipping now, if you would like engraving please let me know what you would like most.
I'm thinking "4V 281 Marauder" or "4V 281 SUPERCHARGED" for you supercharged guys. The engraving will take some extra time, but too long.

We are also doing "JLT Performance" engraving as well. I like these one

If I can confirm at least 5 sets with one or the other or both I'll get them started.

Thanks for looking and give me your thoughts,

Jay

[Haggis]

Can we get them with personalized engraving?

[Tucker]

We can do personal engraving, it will just take a little longer.
No problem.

Jay

[KillJoy]

We can do personal engraving

Hmmmmm..... KillJoy Covers.....



KillJoy

[Haggis]

COOL....

Does the andodized black match the black of the valve covers in the '03?

[Breadfan]

Those look great!

The tall covers are just what some will need who want to get this larger GMS coils too.

[magindat]

Anodized will be smooth. Our black is a spray-on finish. They'll match by color but not by texture.

[BruteForce]

I'm in for an engraved TALL set in black. Both sides to be engraved thusly:

4V 4.6L
SUPERCHARGED

[Tucker]

For engraving on both sides it will run $15 extra.
I did both sides on mine.
Most are only one side due to the intake covering most of the one side, but you can still see it.

Thanks
Jay

[marales]

Count me in for a black passenger side engraving covers.

[Blackened300a]

Any chance of getting a God's head on the cover?

[Tucker]

If someone can send me a 'dxf" or "eps" file I'll see what I can do
jay@jlttruecoldair.com

[Ladyhawke]

Any more word on these? Do you have five orders yet?

[FastMerc]

Can we get them with personalized engraving?

Oh ya S55 MARAUDER WITH GODS head!!!

[Tucker]

I should have a set of 4V281 SUPERCHARGED today. I'll take some pics and post them.
I need to keep the engraving to a minimum on my stocking parts as the more we have the more I need to stock. I like to stock parts in the amounts of 20-30, so I will keep it to blank and 1 or 2 others.
Any custom order can be done for sure, but will take a week or so to be done. Not a huge time delay by any means.

As for the Gods head, I need a file to do it. If anyone has it or knows where to get it let me know,
Thanks
Jay