Results 1 to 6 of 6

Thread: Top Coat F11

  1. #1
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2

    Question Top Coat F11

    Anyone have any experience with Top Coat F11?

    ps Not the Hot Sauce.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  2. #2
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,737
    I was thinking about new waxes, sealants and how to get a deeper shine yesterday. I internet checked the above, and it got some poor ratings. Haven't used it yet.

    I am very interested in this topic though. I've got many coats off Zymoil, and I'd like something glossier, richer, and deeper.


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  3. #3
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    I have had good luck with Zaino products.

    I can't use wax as it's a daily driver and during the Summer wax melts off.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  4. #4
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,737
    Quote Originally Posted by sailsmen View Post
    I have had good luck with Zaino products.

    I can't use wax as it's a daily driver and during the Summer wax melts off.
    So what do you use them?

    Vegas heat?


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  5. #5
    Join Date
    Aug 2009
    Location
    Florida Keys
    Age
    63
    Posts
    3,636
    I switched to coatings shortly after buying the Caddy vowing to deal with less swirl marks on the next *!#**!! Black car. I used Opti coat when ot first came out but wasn't pleased with the end results. (Very likely installer error).
    Last summer I switched to Carpro CQuartz UK. Wow! Amazing stuff!
    I am now using pretty much all their products.
    Essence
    Reset
    Reload
    Spotless
    Ech2O
    And Hydro2
    I am using the HydroFoam on my Sprinters as a stand alone wash, sealant.

    The CQuartz UK has a deep shine and it's hard as a rock.
    It's all BS until you can show me the time slip!

    Trilogy #36
    #2529 of 7839
    See Garage for mods.
    O bsessive
    C ar
    D etailer

    SOLD

    2014 Caddilac CTSV Wagon
    CAI
    DRs
    11.70 @ 119 mph
    505 RWHP at Mo's untuned.


    10/16 mods
    Ported blower. LTs catless mids, flex fuel kit, pulleys, badness.
    621/626 on E49 tuned for E85
    10.65 @ 128.9 SSHS16

  6. #6
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    In the New Orleans area.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Clear Coat for Wheels
    By vkirkend in forum Tires & Wheels
    Replies: 10
    Last Post: 02-06-2014, 06:40 PM
  2. powder coat
    By burt ragio in forum Community Discussion
    Replies: 2
    Last Post: 04-16-2008, 05:51 AM
  3. To coat or not to coat
    By nick filippides in forum Kook's Custom Headers
    Replies: 14
    Last Post: 06-29-2004, 11:27 AM
  4. Clear Coat
    By tomd in forum Wash, Wax and Detailing
    Replies: 14
    Last Post: 05-28-2003, 06:41 AM
  5. leather coat sizes
    By greggtsr in forum Community Discussion
    Replies: 7
    Last Post: 02-21-2003, 04:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •