Good evening folks....I finally got my motor rebuilt and looking for a dyno shop that doesn't charge my first born for a tune?
Good evening folks....I finally got my motor rebuilt and looking for a dyno shop that doesn't charge my first born for a tune?
Welcome to the DARKSIDE...
2003 Black Mercury Marauder
Black and Chrome RPM 505 wheels staggered 18x8 and 18x9, Custom tune by ELD Performance, JLT cold air intake, FRPP 4:10 gears, PI 3000 Stall Torque converter, PHP intake spacer, Stainless Works Complete Exhaust, Eibach Pro Springs, Steeda underdrive pulleys, Custom Painted Black factory spoiler, 15% Tint front and rear , Kenwood Excelon 6x8 Front and 6x9 rear Speakers, Pioneer 600w 4 channel amp, Zack and Mack Control arms, Addco Front and Rear Sway bars
Best run: 13.75 @ 99.6 sec on 4 May 07
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
+1 on Mo's!
I live in Maryland. Looking for a local shop.
Welcome to the DARKSIDE...
2003 Black Mercury Marauder
Black and Chrome RPM 505 wheels staggered 18x8 and 18x9, Custom tune by ELD Performance, JLT cold air intake, FRPP 4:10 gears, PI 3000 Stall Torque converter, PHP intake spacer, Stainless Works Complete Exhaust, Eibach Pro Springs, Steeda underdrive pulleys, Custom Painted Black factory spoiler, 15% Tint front and rear , Kenwood Excelon 6x8 Front and 6x9 rear Speakers, Pioneer 600w 4 channel amp, Zack and Mack Control arms, Addco Front and Rear Sway bars
Best run: 13.75 @ 99.6 sec on 4 May 07
What's up brother! Long time no hear! do you have any special mods or just motor? Just motor then Mo can send you a tune. If you want a dyno tune for mods I suggest you come visit my tuner in DE Performance Evolution in Smyrna. I'll by you lunch while you wait.
2004 MM (Black) #112 of 3213 (SOLD)
2022 Ford Ff-150 SuperCab Iconic Silver "Powerboost"
3.35 L 4X4
-AND-
SLAYER1
formerly owned by "Impala Slayer!! 2004 SB MM
Kenne Belle 2.8 (Liquid Cooled), MMR "Boss 302" Block, L&M Engines rebuild Kooks Headers and cats, Accusump Pre-Oiler Dynamax VT mufflers, MBS 2 1/2" exhaust, 4.10's, 2800 stall, Argento 312 "Color" Powder coated wheels, Rears widened 1 1/2 "703
702 RWHP/653 RWTQ @ 21 Lbs. Boost, M/M catch can, 3 pillar gauge (Boost, Fuel, air intake and coolant temp, custom console cover, S-55 treatment etc...
Mo will also remote tune over the phone or if it's easy for you, then rent a dyno if need be.
Sent from my iPhone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Welcome to the DARKSIDE...
2003 Black Mercury Marauder
Black and Chrome RPM 505 wheels staggered 18x8 and 18x9, Custom tune by ELD Performance, JLT cold air intake, FRPP 4:10 gears, PI 3000 Stall Torque converter, PHP intake spacer, Stainless Works Complete Exhaust, Eibach Pro Springs, Steeda underdrive pulleys, Custom Painted Black factory spoiler, 15% Tint front and rear , Kenwood Excelon 6x8 Front and 6x9 rear Speakers, Pioneer 600w 4 channel amp, Zack and Mack Control arms, Addco Front and Rear Sway bars
Best run: 13.75 @ 99.6 sec on 4 May 07
I always get the cheapest tune to go with the cheapest everything else that way when it breaks it's cheapest to be fixed.
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
MO's is worth the drive, but it's your car.
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
I'll be driving down to Mo's sometime in the future to get 4.10 gears and redynoed. Its a 19 hour drive for me but I want a place I can trust.
Last edited by TrilogyMarauder; 10-18-2017 at 04:30 PM.
I trailered mine 11 hours each way from Chicago!
Sent from my iPhone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
My route was over 1,565 miles to get it done right & with some sight seeing in Atlanta.
I'll be back there a 6th time after Louisville 2018.
Trilogy With Comp Cams Stage 3 Sound's
https://www.youtube.com/watch?v=GUIRJ1zGhSA
https://www.youtube.com/watch?v=AAUWZ9f8gXw
https://www.youtube.com/watch?v=mrPUl529gog
https://www.youtube.com/watch?v=KvfRjhiGT4w N/A Sound
Dyno By "Mo's Speed Shop",Dallas,Georgia https://www.youtube.com/watch?v=VqxN3FjWd6s
445 RW/HP @ 398 Torque S/C
Jeff Doing a Traditional Burn Out At "Mo's Speed Shop" https://www.youtube.com/watch?v=nCyKuC5heAI
So Far Best Run12.84 @106 MPH https://www.youtube.com/watch?v=dlA-0vB0HwU
Big "Thanks" To Gerald,Derek,Bill & Harrison
"Thanks" Martyo & Jeff
#6486 of 11,052 03 300B In Black
On my way back from C-School in Norfolk Va, I detoured to Mo's for a tune. Best choice I ever made regarding my Vic's performance. Your about 10 hours from him. Road trip. You won't be disappointed.
2003 Mercury Marauder- Stock with 223k miles.
2000 Crown Victoria P73. Deep Wedge Wood Blue.
SW longtube headers and high flow cats, magnaflow mufflers, 3.55 gears w/track lock, 70mm Aviator TB, PnP factory plenum, ADTR intake tube, 87 octaine tune by MO. Bilstein HD shocks, Mecto Rear control arms w/ watts link, Addco custom order 1.5 inch front sway bar (38mm), 1.25 inch rear bar 31.75mm (only 11 made).
The people have spoken.
Holler at me if I can help.
There are currently 1 users browsing this thread. (0 members and 1 guests)